Low-voltage electrical maintenance and fault response
We respond to failures and maintain panels, breakers, starters, protections and connections. We diagnose, replace components, source spare parts and integrate new equipment into your installation.
What it involves
Most low-voltage electrical failures start with something that could have been spotted earlier: a loose connection that heats up, a worn contact or a breaker no one has tested in years. Scheduled maintenance finds those points before they cause a shutdown.
When the failure has already happened, what matters is finding the real cause, not just replacing the part. We diagnose, correct and leave you in writing what should be addressed next.
When is it needed?
- You have an urgent failure that needs attention right now.
- Your panels have not been maintained in a long time.
- There are loose or damaged connections, a burning smell or noises in a panel.
- You need to connect new equipment to your installation.
- You want an annual electrical maintenance program.
What it includes
The final scope is defined with you, based on your installation and what you need to solve.
Inspection and diagnosis
Review of panels, connections and protections to find the real cause of the failure or the risk points.
Cleaning and re-torquing
Panel cleaning and re-torquing of connections.
Component replacement
Replacement of damaged or discontinued components, with spare parts sourced by us.
Report
What was found, what was corrected, the components replaced and what should be addressed next.
What we need to serve you
The basics are enough to quote. If you are missing some data, don't stop: we gather it on site as part of the service.
To carry out the work
Requested once the service is confirmed. We help you gather it.
- Single-line diagram of the areas to be serviced.
- History of previous failures and maintenance, if you have it.
- Spare parts available in your storeroom.
- Work permit and your plant's lockout/tagout procedure.
- Plant contact person during the service.
Your information is treated as confidential and is used only for your project.
Studies with measurements at your plant
We measure directly at your facility and deliver interpreted results with clear recommendations.
Electrical diagnostics of motors and equipment
We check voltage, current, imbalance and harmonics on the equipment supply while it runs.
Useful for: motors that overheat or trip, drives with repeated faults and checking equipment before accepting it.
Harmonics assessment
We measure voltage and current distortion, harmonic by harmonic, at the points you are concerned about.
Useful for: transformers or cables that overheat, failing capacitors and loads with drives or rectifiers.
How the service is performed
Diagnosis
We review your installation and the failure or the condition of the equipment.
Proposal
We define what gets corrected, what gets replaced and in which window.
Execution
We source the spare parts and carry out the work.
Report
We deliver the report with photos and recommendations.
What people ask us most
Do you handle urgent failures?
Yes. Send us a description and photos of the failure on WhatsApp; we respond within 24 business hours.
How often should maintenance be done?
As a reference, an annual review; the frequency is adjusted to the condition and criticality of each piece of equipment.
Do you source spare parts?
Yes. We source the components and, if they are discontinued, propose an equivalent replacement.
Can you connect new equipment to my installation?
Yes. We verify that the panel and protections have capacity for the new load and make the connection during the agreed window.
Do you have a case at your plant?
Tell us what you need to solve and what information you have. A specialist will reply with the scope and next steps.