Electrical Systems and Smart Monitoring
Switchgear, maintenance, studies and electrical monitoring in Monterrey and across Mexico, to reduce costs, avoid downtime and keep your operation running.
Does any of this sound familiar?
What we do, how it works and what results to expect
Each solution addresses a specific problem in your operation. Choose the one closest to your case and talk directly with a specialist.
Energy Monitoring Program
Submetering for your plant with a direct line to us: when the system detects an alarm, we receive it, analyze it and contact you immediately with what is happening and what to do.
It's for you ifyou want someone experienced watching your electrical system, not just looking at charts.
How the direct line works
- The system detects an alarmPower quality, demand or consumption out of the normal range.
- We receive and analyze itA specialist reviews what caused it and how serious it is.
- We contact you with what is happeningWe explain the cause and what we recommend doing.
- If it is a failure, we actWe immediately send you the quote or the emergency service order.
Power and control panel assembly
We build power and control panels, MCCs and starters, and upgrade panels that have reached the end of their service life.
It's for you ifyou need a panel for new equipment or an expansion, or yours is obsolete, overheats or spare parts are no longer available.
- Panel assembled and tested before installation
- Current components with available spare parts
- Room to grow
What you get and how it works
What you get: The panel assembled, tested, installed and started up, with the job documentation.
How it works: We define the engineering with you, assemble and test the panel, and install and start it up during the agreed shutdown window.
Low-voltage service and maintenance
We respond to failures and maintain panels, breakers, starters, protections and connections. We diagnose, replace components, source spare parts and integrate new equipment into your installation.
It's for you ifyou have a failure that needs attention now, your panels have not been maintained in a long time, there are hot connections or you need to connect new equipment.
- Diagnosis with the real cause of the failure
- Component replacement and spare parts from a single supplier
- Scheduled maintenance during your shutdown window
What you get and how it works
What you get: The work completed and a report with what was found, what was corrected, the components replaced and what should be addressed next.
How it works: We diagnose your installation, define what gets corrected and what gets replaced, source the spare parts and carry out the work during the shutdown window agreed with your team.
Submetering by area, process or tenant
We measure separately how much energy each area, line, process or tenant consumes, and you can check it whenever you want.
It's for you ifyou want to see and manage your consumption on your own, or you need to bill electricity to your tenants.
- You know exactly where the energy goes
- You allocate or bill costs with data
- You find where to save first
What you get and how it works
What you get: Meters at the points we define together and access to consumption data by area.
How it works: We review how you allocate costs today, define the metering points and install the meters. Would you also like us to watch the alarms for you? That is the Energy Monitoring Program.
Specialized electrical studies
These are the studies we perform:
- Power qualityHarmonics, voltage variations and power factor. View study →
- Short circuitFault currents to select and validate equipment. View study →
- Protection coordinationEach protective device trips when and where it should. View study →
- Arc FlashRisk level for personnel and panel labeling. View study →
- Avoid penalties and findings in inspections or audits.
- Connect new equipment to an existing installation without putting operations at risk.
- Know the real risk to your personnel before working on a panel.
- Find the cause of trips or failures that keep repeating without explanation.
CFE bill review and compliance
We analyze the issues that appear on your electric bill and propose the solution.
It's for you ifyou have charges or penalties you don't understand, your contracted demand doesn't match your usage, or CFE has issued technical observations.
- You understand what you are being charged and why
- You stop paying avoidable charges
- You address CFE requirements in order
What you get and how it works
What you get: An analysis of your bill with the cause of each charge and the proposed solution; if you need it, we also carry it out.
How it works: We review your bills and how you consume energy, identify where each charge comes from and propose technical or operational corrections.
Not sure which one you need?
Tell us what is happening at your plant and a specialist will tell you where to start.
One team from start to finish
Whether it is maintenance, a study, a repair or an upgrade, the same team handles the survey, the engineering, the execution and the commissioning. You decide the scope at every stage.
Site survey
We visit your plant, review the installation and understand the real need.
Engineering and proposal
We diagnose the cause and define the solution: scope, timing and cost.
Execution
We repair, maintain, install or upgrade with our own team.
Testing and commissioning
We test on site and start up with you; nothing is handed over without verification.
Handover and follow-up
We document the work and follow up so the result lasts.
↻ Something new comes up? The same team returns to the site survey
One point of responsibility from start to finish
No intermediaries or separate suppliers to coordinate: the same team is accountable for the result.
Our other divisions
Facing any of these problems in your operation?
Tell us about your situation and we will help you define the first step. No obligation.